Features:
1. These lathes are ideal for turning cast iron and steel workpiece, turning of nonferrous steel areas of big or medium dimensions.
two. It can do external cylindrical area turning, interior hole and finish experience turning.
three. It can also change different interior and exterior metric, inch, module and diametrical pitch threads, the leading slide can be used independently for turning of limited taper.
four. These lathes are of high electrical power, higher rigidity and broad rotating speed range, so it can be used for high pace and strong force turning.
5. Bed with higher rigidity
Casted in whole piece, box type interior structure, of higher rigidity, with hardened guideway, TSF coated carriage to minimize the possibility of reduced speed stick-slip.Â
six. Main spindle with high rigidity and large accuracy
  Spindle comes with bearing of renowned brand, spindle-box of heat-symmetrical framework to avoid spindle axis drifting, oil lubricating to minimize warmth distortion.
  Spindle comes with a few assistance composition to secure accuracy and enhance rigidity, all gears quenched and tooth-ground to safe exact transmission and low sounds, so the spindle is of reduced temperature rise, minimized warmth distortion, and extended-expression steady large accuracy.
Optional accessaries:
Huge centre rest Big centering bracket Motor Driven Tailstock and Tailstock with totarg guill Chuck guard, device submit defend, cable carring chain.
| Model | AL-1000B | AL-1250B | AL-1600B | ||
| Capacities | Swing in excess of mattress | 1000mm | 1250mm | 1600mm | |
| Swing over carriage | 615mm | 865mm | 1250mm | ||
| Max. size of workpiece | 150030005000600080001000012000(mm) | ||||
| Max. turning duration | 13002800480058007800980011800(mm) | ||||
| Span of guideway | 755mm | ||||
| Spindle | Spindle nose | A215(8×M22)mm | |||
| Spindle gap | morse six(mm) | ||||
| Taper gap of spindle | one:twenty/a hundred and forty | ||||
| Number of CZPT turning speeds | 21 | ||||
| Quantity of reverse turning speeds | 12 | ||||
| Spindle pace | Forward | 3.15~315(r/min) | |||
| Reverse | three.5~291(r/min) | ||||
| Feed motion | Quantity of feeds per revolution(longitudinal/transverse) | fifty six/56 | |||
| Feed for each revolution | Longitudinal | .1~12(.004″~.473″)mm | |||
| Transverse | .05~six(.002″~.236′)mm | ||||
| Higher resource-put up | .571~three(.001”~.118″)mm | ||||
| Number and variety of metric thread | 441~120mm | ||||
| Quantity and selection of inch thread | 31 28~1/4″ | ||||
| Variety and assortment of module thread | 450.five~60mm | ||||
| Quantity and selection of diametrical pitch thread | 381/two~56DP | ||||
| Tool put up | Length among spindle centerline and resource resting airplane | 48mm | |||
| Section of resource shank | 45mm | ||||
| Resource post swing assortment | ±90° | ||||
| Max. travel of carriage | 1402950495059507950995011950(mm) | ||||
| Max. journey of top slide | 300mm | ||||
| Max. travel of cross slide | five hundred(twenty”)mm | 580(22”)mm | 630(24″)mm | ||
| Instrument publish journey for every turn of the slide of leading or cross slide | .05(.002″)mm | ||||
| Rapid vacation velocity | Longitudinal | 3740mm/min | |||
| Transverse | 1870mm/min | ||||
| Prime slide | 935mm/min | ||||
| Tailstock | Diameter of tailstock quill | a hundred and sixty(6”)mm | |||
| Journey of tailstock quill | three hundred(12″)mm | ||||
| Taper gap of tailstock quill | Morse 6 | ||||
| Acceptance conditions | GB/T4571-1997 Accuracy parallel lathe | ||||
| JB/T2322-1993Â Phrases parallel lathe | |||||
| Other folks | Primary motor power | 22kw | |||
| Max. bodyweight ofworkpiece | 6000kg | ||||
| Machine total dimension | Size | 4600610081009100111001310015100(mm) | |||
| Peak | 1700mm | 1825mm | 2150mm | ||
| Width | 2150mm | ||||
| Machine mass | AL-1000B | 9200107001210012800142001560017000(kg) | |||
| AL-1250B | 15710118001480015500169001830019700(kg) | ||||
| AL-1600B | 11400129001590016600180001940021000(kg) Â |
||||
